Thermodynamic analysis of ethanol synthesis from hydration of ethylene coupled with a sequential reaction

Coal-based ethanol production by hydration of ethylene is limited by the low equilibrium ethylene conversion at elevated temperature. To improve ethylene conversion, coupling hydration of ethylene with a potential ethanol consumption reaction was analyzed thermodynamically. Five reactions have been attempted and compared: (1) dehydration of ethanol to ethyl ether ({\mathrm{2C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}\mathrm{OH}\iff{\mathrm{C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{OC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+H}}_{\mathrm{2}}\mathrm{O}), (2) dehydrogenation of ethanol to acetaldehyde ({\mathrm{C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}\mathrm{OH}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{CHO+H}}_{\mathrm{2}}), (3) esterification of acetic acid with ethanol ({\mathrm{C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{OH+CH}}_{\mathrm{3}}\mathrm{COOH}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{COOC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+H}}_{\mathrm{2}}\mathrm{O}), (4) dehydrogenation of ethanol to ethyl acetate ({\mathrm{2C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}\mathrm{OH}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{COOC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+2H}}_{\mathrm{2}}), and (5) oxidative dehydrogenation of ethanol to ethyl acetate ({\mathrm{2C}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{OH+O}}_{\mathrm{2}}\iff {\mathrm{CH}}_{\mathrm{3}}{\mathrm{COOC}}_{\mathrm{2}}{\mathrm{H}}_{\mathrm{5}}{\mathrm{+2H}}_{\mathrm{2}}\mathrm{O}). The equilibrium constants and equilibrium distributions of the coupled reactions were calculated and the effects of feed composition, temperature and pressure upon the ethylene equilibrium conversion were examined. The results show that dehydrogenation of ethanol to acetaldehyde has little effect on ethylene conversion, whereas for dehydrogenation of ethanol to acetaldehyde and ethyl acetate, ethylene conversion can be improved from 8% to 12.8% and 18.5%, respectively, under conditions of H₂O/C₂H₄ = 2, 10 atm and 300°C. The esterification of acetic acid with ethanol can greatly enhance the ethylene conversion to 22.5%; in particular, ethylene can be actually completely converted to ethyl acetate by coupling oxidative dehydrogenation of ethanol.     

Enhanced relative permittivity in niobium and europium co-doped TiO2 ceramics

The appearance of colossal permittivity materials broadened the choice of materials for energy-storage applications. In this work, colossal permittivity in ceramics of TiO₂ co-doped with niobium and europium ions ((Eu_0.5Nb_0.5)_xTi_1-xO₂ ceramics) was reported. A large permittivity (ε_r ～ 2.01?×?10⁵) and a low dielectric loss (tanδ ～ 0.095) were observed for (Eu_0.5Nb_0.5)_xTi_1-xO₂ (x?=?1%) ceramics at 1?kHz. Moreover, two significant relaxations were observed in the temperature dependence of dielectric properties for (Eu, Nb) co-doped TiO₂ ceramics, which originated from defect dipoles and electron hopping, respectively. The low dielectric loss and high relative permittivity were ascribed to the electron-pinned defect-dipoles and electrons hopping. The (Eu_0.5Nb_0.5)_xTi_1-xO₂ ceramic with great colossal permittivity is one of the most promising candidates for high-energy density storage applications.     

Effect of an abrupt change in pulling rate on microstructures of directionally solidified Al2O3-Er3Al5O12 eutectic and off-eutectic composite ceramics

Directionally solidified microstructures of Al₂O₃-Er₃Al₅O₁₂ eutectic and off-eutectic in situ composite ceramics were explored under abrupt-change pulling rate conditions. Corresponding temperature distributions and interface locations were studied. In eutectic composition, fluctuation of eutectic spacing occurred when the pulling rate increased abruptly. A gradually increase or abrupt increase in eutectic spacing was observed when the pulling rate decreased abruptly. In hypoeutectic and hypereutectic compositions, formation of the primary phases were suppressed when the pulling rate increased abruptly from 10?µm/s to 100?µm/s, while primary phases precipitated when the pulling rate decreased abruptly from 100?µm/s to 10?µm/s. The interface altitude decreased after the pulling rate increased abruptly, but increased after the pulling rate decreased abruptly. The liquid composition restriction (around the eutectic composition) at the eutectic interface plays an important role in the suppression of the primary dendrite and coupled eutectic oxides can be obtained in off-eutectic compositions even under higher solidification rate conditions.     

基于星座图对射频指纹识别方法的研究

针对星座图的射频(RF)指纹识别方案中,低信噪比环境下识别准确率低的问题,提出一种基于欧式距离与幅度距离的二维识别算法来进行RF指纹识别。该方案通过对星座图进行优化处理,可从优化后的星座图中提取识别性能更好的RF指纹,再通过二维识别算法来提高识别准确率。仿真结果表明:与仅用欧式距离作为判断依据的方法相比,所提出的二维识别算法的识别准确率最高可提升8%,在设备容量为50组的情况下识别准确率为77.8%,并且从优化后的星座图中所提取的RF指纹具有更好的唯一性和稳定性。     

Extending SSD Lifespan with Comprehensive Non-Volatile Memory-Based Write Buffers

Journal of Computer Science and Technology - New non-volatile memory (NVM) technologies are expected to replace main memory DRAM (dynamic random access memory) in the near future. NAND flash...     

A computer aided design method for car form and its application based on shape parameters

In the early design stage, automotive modeling should both meet the requirements of aesthetics and engineering. Therefore, a vehicle CAD (computer aided design) model that can be easily adjusted by feedbacks is necessary. Based on CE-Bézier surface, this paper presents a set of algorithms for parametric segmentation and fairing surface generation in a car model. This model is defined by a simplified automotive template and relevant control points, shape parameters and segmentation parameters, which can be modified to alter the car form efficiently. With this model and the corresponding adjustment method, more than fifty various vehicle models are established in this research according to different parameters. And two methods for calculating similarity index between car models are constructed, which are suitable for brand design trend analysis and modelling design decisionmaking.     

Study on the Height of the Mining-Induced Water-Conducting Fracture Zone Under the Q 2l Loess Cover of the Jurassic Coal Seam in Northern Shaanxi,China

A method to calculate the height of a water-conducting fractured zone (HWCFZ) was developed based on the plate and shell theory, and the development of the HWCFZ in bedrock and Q2l loess strata is discussed in detail. First, the subsidence-deflection curve equation of the overlying stratum is theoretically derived, and then the ultimate deflection and free space height of rock strata are calculated. Moreover, the strata tensile strain is calculated by using integral calculus. In addition, the failure state of the rock is analyzed by comparing the theoretically calculated tensile strain with the experimentally measured yield tensile strain, allowing one to attain the maximum value of HWCFZ. This approach was tested at the Jinjitan coal mine; the theoretically predicted, experimentally measured, and numerically computed maximum HWCFZ values were 189.5, 187.3, and 188.5 m, respectively, demonstrating the accuracy of the proposed method. These results are highly significant for safe and environment-friendly coal mining in northwest Shaanxi, China.     

咖啡渣活性炭的制备、表征及其对Cr(Ⅵ)的吸附机制研究

以碘吸附值为评价指标，活化时间、活化温度和浸渍比为影响因素，采用响应面法试验设计对磷酸活化法制备咖啡渣活性炭的工艺条件进行优化，并通过静态吸附试验研究了不同吸附时间、溶液pH值和吸附温度条件下，活性炭对水溶液中Cr（Ⅵ）吸附性能的影响，最后利用Langmuir、Freundlich吸附等温方程、准一级动力学方程、准二级动力学方程和颗粒内部扩散方程进行拟合。试验结果表明，制备咖啡渣活性炭的最佳工艺条件为活化时间1 h、活化温度498℃、浸渍比1.72；在此条件下活性炭得率为30.4%，碘吸附值为（799±16）mg/g，比表面积为1 006 m²/g，孔容为0.779 cm³/g、微孔孔容为0.051 cm³/g、平均孔径为3.088 nm。较低pH值和较高温度能够促进活性炭对Cr（Ⅵ）的吸附；Langmuir等温方程能够更好地描述活性炭对Cr（Ⅵ）的吸附效果；活性炭对Cr（Ⅵ）的吸附分3个阶段：快速吸附阶段、慢速吸附阶段和吸附平衡阶段，10 min内可完成吸附总量的79%，360 min内达到吸附平衡，该吸附过程符合准二级吸附动力学方程。分析表明咖啡渣活性炭对Cr（Ⅵ）的吸附主要为单分子层的化学吸附。